eSATA External Storage: Digital Video eSATA External Storage Devices
These external storage devices offer additional HDD storage for extended recording capacity with the FA-HDX16 model DVR and NVR16 network video recorder.
eSATA External Storage Devices available in desktop tower and rack mount configurations with four (4) and five (5) bay units. These devices are used with the FA-HDX16 recorder and NVR16 to extend the storage capability up to a maximum of 18 TB.
Note: RAID 5 configuration requires a minimum of 3 hard disk drives (HDD). Due to the fact that the equivalent amount of storage equal to one HDD is required by the Operating System (OS) to facilitate fail safe backup and the rebuilding of any replaced HDD; if one HDD fails, the entire storage system will continue to function. When the failed HDD is replaced the OS will rebuild the new HDD with the data that was on the original HDD that failed. This means if the storage system has a total of 3 HDD’s, only the storage space of 2 HDD’s can be considered as usable for storage calculations; if a total of 5 HDD’s, only 4 HDD’s can be considered as usable.
Please refer to the DVR’s specification data sheet for information on specific storage duration per each HDD size.
NOTE: Special Order Items—- Call for Availability
- Units come with HDD’s installed and pre-configured RAID 5
- eSATA and USB 3.0 interface; backward compatible with USB 2.0
- True hardware RAID design within the enclosure, no driver or additional RAID controller needed
- Provides hardware RAID redundancy protection against hard drive failures
- Each model includes Power Cord, eSATA Cable, USB 3.0 Cable, Manual and Screws
Hardware RAID 5 storage, with built-in rack mount bracket
|4-HDD BAY UNIT||5-HDD BAY UNIT|
|HDD Trays||4 Hot-Swappable 3.5"||5- Hot-Swappable 3.5"l|
|RAID Level||Pre-configured RAID 5||Pre-configured RAID 5|
& Transfer Rate
|USB 3.0 (backward compatible with USB 2.0) & eSATA||USB 3.0 (backward compatible with USB 2.0) & eSATA|
|Drive Interface||4 x 3.5" SATAI/ SATAII||5 x 3.5" SATAI/ STAII|
|Cooling Fan||3.15" Ball Bearing Fan||4.7" Ball Bearing Fan|
|Power Supply||150W (115V-230V Switchable)||220W (103V-253V)|
|Weight||5.9lbs (2.7kg)||9.3lbs (4.2kg)|
|Safety Regulations||CE, FCC, UL, RoHS||CE, FCC, UL, RoHS|
|HDD Trays||4 Hot-Swappable 3.5”|
|RAID Level||Pre-configured RAID 5|
|Host Interface & Transfer Rate||USB 3.0 (backward compatible with USB 2.0) and eSATA|
|Drive Interface||4 x 3.5” SATA I/ SATA II|
|Cooling Fan||4 x Internal|
|Power Supply||220W (100V-240V)|
|Dimensions (WxHxD)||19 x 1.7 x 21in (483 x 43 x 533mm)|
|Safety Regulations||CE, FCC, UL, RoHS|